Model Name IMP12-1B5PPVC0D
Part No. 6050129

At a glance

Pressure resistant up to 500 bar
Expected service life of up to 1 million pressure cycles
Sensing range of 1.5 mm flush
IP 68
Stainless steel housing with active surface made from stable high-performance ceramic
State-of-the-art ASIC technology from SICK
Gas-tight at the sensor face
3 and 4-wire versions
Your benefits

Reduced maintenance costs
Extremely resilient and durable
Up to 50 times longer service life compared to conventional sensors under pressure cycles
Simple compensation of cylinder tolerances
Simple integration due to small design
Controlled piston deceleration
Increased piston service life due to collision prevention at the end of the work cycle






Features
Design: Cylindrical
Thread size: M12 x 1
Sensing range Sn: 1.5 mm
Assured sensing range Sa: 1.2 mm
Pressure resistance: ≤ 500 bar
Installation type: Flush
Switching frequency:: 600 Hz
Output type: PNP
Output function: Complementary
Electrical wiring: DC 4-wire
Enclosure rating:: IP 68 1)
Connection type:: Connector M12, 4-pin
1) Sensing face


Mechanics/electronics
Supply voltage: 10 V DC ... 30 V DC
Vacuum resistance: 10-8Torr 1)
Residual ripple: ≤ 20 % 2)
Voltage drop: ≤ 2 V 3)
Power consumption: ≤ 10 mA 4)
Time delay before availability: ≤ 50 ms
Hysteresis: 1 % ... 15 % 5)
Repeatability: ≤ 7 % 6) 7)
Temperature drift (of Sr): ± 10 %, ± 15 % 8) 9)
EMC: According to EN 60947-5-2
Output current Ia: ≤ 200 mA
Short-circuit protection:
Reverse polarity protection:
Power-up pulse protection: -
Shock/vibration: 30 g, 11 ms / 10 ... 55 Hz, 1 mm
Ambient operating temperature: -25 °C ... 100 °C
Housing material: Stainless steel, V2A
Housing cap material: Ceramics, ZrO2
Size support ring: 10 mm x 5.9 mm x 1 mm
Size sealing ring: 5.3 mm x 2.4 mm
Material sealing ring: FPM
Housing length: 78 mm
Thread length: 42 mm
Tightening torque, max.: ≤ 40 Nm
1) Front 2) Of VS 3) With Ia = 200 mA 4) Without load 5) Typ. 8% 6) 7) 8) -25 °C...+70 °C 9) +70 °C...+100 °C


Reduction factors
Note: The values are reference values which may vary
Carbon steel St37 (Fe): 1
Stainless steel (V2A, 304): Ca. 0.75
Copper (Cu): Ca. 0.12
Aluminum (Al): Ca. 0.2
Brass (Br): Ca. 0.34



Installation note
Remark: Associated graphic see "Installation"